0.6/1KV fire proof flame retardant electrical power cable

0.6/1KV flame proof retardant cable

Rated voltage: 0.6/1kv 

Nominal cross sectional area of conductor: 1.5~400mm2 

Standard

The product is manufactured according to the standard of GB12796-91 and GB 12666.5-90  or IEC,BS,DIN and ICEA upon request. 

Applications

The product  is suitable for use in power distribution lines with rated power -frequency voltage up to and including  0.6/1kV

Operating characteristics

1, Rated power-frequency voltage Uo/U :0.6/1 kV

2,Max.permissible continuous operating temperature of conductor: 90 

3,Max.short-circuit temperature of conductor shall not exceed 250.(5s maximum duration ).

4,The ambient temperature under installation should not below 0 

5,The flame retardant performance of cable is in according with A or C grade request of GB 12666.5-90

6,The low smoke and non-halo of cable is in according with IEC60751 

7,When end product burning ,PH value and conductivity of insulation and sheath material should suit infra-table regulate.

8.The low smoke and non-halo of cable is in according with IEC61034

9,When end product burning, the minimum light transmittance should not less than 30%

10, The bending radius of cable should not less than 15 times of the cable diameter

Advanced Manufacturing Equipments

TEST REPORT

1.Coppe Fire Cable  2. Mica Tape Insulated Cable  3.Fire Resistant Cable  4.Fire-Proof Cable  5.Flame Retardant Cables  6.Insulated Fire Retardant Cable

Product Categories : Fire-Proof Cable