Huayuan Gaoke Cable Co.,Ltd.
FOR TRANSMISSION LINES CABLE,OVERHEAD COWSLIP AAC CONDUCTORS CABLE,BARE CABLE
Huayuan Gaoke Cable Co.,Ltd.
FOR TRANSMISSION LINES CABLE,OVERHEAD COWSLIP AAC CONDUCTORS CABLE,BARE CABLE
| Payment Type: | L/C,T/T,D/P,Paypal,Money Gram,Western Union |
|---|---|
| Incoterm: | FOB,CFR,CIF,FCA,CPT,CIP |
| Min. Order: | 1000 Bag/Bags |
Model No.: AAC
Brand: HUAYUAN YONGTONG
Application: Overhead
Voltage: High Voltage Cable
Current: AC Cable
Insulation Material: Bare
Sheath Material: Crosslinking
Material Shape: Round Wire
Wire Core Material: Steel
Certification: ISO
Brand: HUAYUAN YONGTONG
Packaging: Drum
Productivity: 1000km/M
Transportation: Ocean,Land,Air
Place of Origin: Beijing,China
Supply Ability: 1000km/M
Certificate: CE,CCC,ISO
Port: Tianjin Port,Shanghai Port,Beijing
Payment Type: L/C,T/T,D/P,Paypal,Money Gram,Western Union
Incoterm: FOB,CFR,CIF,FCA,CPT,CIP
1. GENERAL
This listed specification covers the structure, performance, test and packing information of bare conductor as manufactured by Beijing Huayuan Gaoke Cable Co., Ltd. (hereinafter referred as TBEA).
Matters not mentioned in this technical specification shall be negotiated by purchaser & supplier. This document confirms the two parties agreement as technical agreement of contract unless otherwise in official written annexes.
2. APPLICALBE STANDARDS
The cable offered shall be designed, manufactured and tested according to international standards as follows:
| Quality Control Standard | |
| ISO 9001 | Quality Management Systems |
| ISO 14001 | Environmental Management Systems |
| Applicable Standard | |
| ASTM B 231/B 231M | Standard Specification for Concentric-Lay-Stranded Aluminum-1350 Conductors |
3. CONDUCTOR STRUCTURE FOR AAC CONDUCTOR
1)
AAC VERBENA 700 MCM
| Construction | Nominal NO./Diameter(mm) | Nominal Diameter(mm) |
| 1--- Aluminum wire | 37/3.49 | 24.43 |
2)
AAC COWSLIP 2000 MCM
| Construction | Nominal NO./Diameter(mm) | Nominal Diameter(mm) |
| 1--- Aluminum wire | 91/3.77 | 41.47 |
4. GUARANTEED TECHNICAL PARTICULARS
| DATA SHEET OF AAC VERBENA 700 MCM | ||
| Particulars | Unit | Tender value |
| Manufacturer | | Beijing Huayuan |
| Country of Origin | | CHINA |
| Nominal cross-sectional area | mm2 | 354.7 |
| Construction (No./nominal diameter ) | /mm | 37/3.49 |
| Calculated Al Area | mm2 | 353.95(before stranding) |
| Outer diameter of the conductor | mm | 24.43(nominal) |
| Maximum resistance at 20℃ | ohm/km | 0.0814(D.C) |
| Rated strength | kN | ≥55.4 |
| Current rating (25℃ ambient temperature) | Amp | 825(wind speed 0.5m/s, conductor temp. 80℃, ambient temp. 25℃,sunlight 1000W/m2, radiation coefficient 0.6, surface absorption coefficient0.5) |
| Conductor weight | kg/km | 976 (approx.) |
| Test requirements for AAC conductor, accordance with ASTM standards. | ||
| DATA SHEET OF AAC COWSLIP 2000 MCM | ||
| Particulars | Unit | Tender value |
| Manufacturer | | Beijing Huayuan |
| Country of Origin | | CHINA |
| Nominal cross-sectional area | mm2 | 1013 |
| Construction (No./nominal diameter ) | /mm | 91/3.77 |
| Calculated Al Area | mm2 | 1015.81(before stranding) |
| Outer diameter of the conductor | mm | 41.47(nominal) |
| Maximum resistance at 20℃ | ohm/km | 0.0287 (D.C) |
| Rated strength | kN | ≥153 |
| Current rating (25℃ ambient temperature) | Amp | 1530(wind speed 0.5m/s, conductor temp. 80℃, ambient temp. 25℃,sunlight 1000W/m2, radiation coefficient 0.6, surface absorption coefficient0.5) |
| Conductor weight | kg/km | 2802 (approx.) |
| Test requirements for AAC conductor, accordance with ASTM standards. | ||
5. STRAIN CREEP CURVES
6. TEST REQUIREMENTS FOR OVERHEAD CONDUCTOR
The following test items shall be carried out in accordance with relevant ASTM standards.
| No. | Test item |
| Tests(The user has no special requirements) | |
| 1 | Tensile test (test frequency 10%) |
| 2 | Wrapping test(test frequency 10%) |
| 3 | Resistivity test(test frequency 10%) |
| 4 | Determination of stress at 1% elongation(test frequency 10%) |
| 5 | Structural inspection(test frequency 10%) |
7. PACKING PARTICULARS FOR OVERHEAD CONDUCTOR
The cables shall be wound on steel-wooden drums. The indelible marking shall be printed on the surface of drum flange in accordance with customer requirements.
| Cable Type | Drum length(m) | Drum Dimensions (mm) | |||
| D | d | b | B | ||
| AAC VERNENA 700 MCM | 3528 | 2200 | 1100 | 940 | 1100 |
| AAC COWSLIP 2000 MCM | 1000 | 2200 | 1250 | 940 | 1100 |
Note: The value [D" shall not contain the dimension of sealing plates.
Factory and Equipment
Package
Honor
Product Categories : Overhead Cable
