Huayuan Gaoke Cable Co.,Ltd.
4x35mm2 Aluminum Alloy Conductor XLPE Insulated Electric Cable,0.6/1KV Insulated Cable,Armour Power Electric Cable
Payment Type: | L/C,T/T,D/P,Western Union |
---|---|
Incoterm: | FOB,CFR,CIF,CPT |
Min. Order: | 1000 Meter |
Model No.: YJLV
Brand: HUAYUAN YONGTONG
Type: Insulated
Conductor Type: Stranded
Application: Underground
Conductor Material: Aluminum
Sheath Material: PVC
Insulation Material: XLPE
Material Shape: Round Wire
Certification: ISO9001
Conductor: Aluminium Alloy
Packaging: Drums
Productivity: 100KM/M
Transportation: Ocean,Land,Air
Place of Origin: BEIJING,CHINA
Supply Ability: 100KM/M
Certificate: CE,CCC,ISO
HS Code: 8544601200
Port: Tianjin Port,Shanghai Port,Qingdao Port
Payment Type: L/C,T/T,D/P,Western Union
Incoterm: FOB,CFR,CIF,CPT
0.6/1kv Aluminum alloy conductor XLPE insulation PVC sheath power cable
Description ====>
1. Applications
Used as bare overhead conductor for primary and secondary distribution. Designed utilizing a high-strength aluminum alloy to achieve a high strength-to-weight ratio; affords better sag characteristics. Aluminum alloy gives AAAC higher resistance to corrosion than ACSR.
2. The properties of aluminum alloy power cable
(1) Under the same cross section, Aluminum alloy conductor weight is 50% to copper core cable ,
as their specific gravity is significant different, even if aluminum alloy cross sections will be enlarged, it also can reduce the conductor weight as its small specific gravity.
(2) Good joint properties: as add the Fe, Mg, rear earth ect. into aluminum: significantly improved the toughness and high anti creep property after annealing. In fact, the joint of copper and aluminum is the most key problems all the time. If copper and aluminum (or aluminum alloy) connect directly; connection contact, as the different materials, existing potential difference, in humidity air can occur electric chemical corrosion. In power system, this corrosion can increase contacting resistance, making the joints heat and become potential danger of system operate safely. Now apply the new technology copper aluminum joint, and eliminate the fatal defect caused by old copper aluminum joint thoroughly, making joint of aluminum alloy cable safe and easy to install.
(3) Improved mechanical properties: as add the alloy Fe, Cu, rear earth ect. Into the purity aluminum, improved the aluminum alloy's comprehensive properties, elongation and creep properties.
(4) To meet the same conductive performance, under the precondition of the same weight , aluminum alloy cable length is copper cable two times , therefore, the same load flow aluminum alloy cable weight is about half of the copper wire, Aluminum alloy cable to replace copper cable, the cable can reduce weight, reduce the installation cost, reduce equipment and cable wear, make the installation work more easily.
1.1kv Cable 2.0.6kv Cable 3.Low Voltage Power Cable 4.Aluminium Cable 5.Electrical Cable Wires 6.Building Wire
Product Categories : Aluminum Alloy Conductor XLPE Insulated Power Cable