http://www.bjhygkcable.com
Home > Products > Low Voltage Power Cable > 1*2.5mm2 XLPE insulated low voltage power extension cable

1*2.5mm2 XLPE insulated low voltage power extension cable

    Payment Type: L/C,T/T,D/P,Western Union
    Incoterm: FOB,CFR,CIF,FCA,CPT,CIP
    Min. Order: 1000 Meter
    Delivery Time: 30 Days
Basic Info

Model No.: N2XY

Type: Insulated

Conductor Type: Stranded

Application: Underground

Conductor Material: Copper

Sheath Material: Crosslinking

Insulation Material: XLPE

Material Shape: Round Wire

Range of Application: LSOH

Certification: VDE, RoHS, CCC, UL, CE, ISO9001

Brand: HUAYUAN YONGTONG

Additional Info

Packaging: DRUMS

Productivity: 100KM/M

Brand: HUAYUAN YONGTONG

Transportation: Ocean,Land,Air

Place of Origin: BEIJING, CHINA

Supply Ability: 100KM/M

Certificate: CE,ISO,CCC

HS Code: 8544601200

Port: Shanghai Port,Tianjin Port,Beijing

Product Description

1*2.5mm2 XLPE insulated low voltage power extension cable

Application:

The XLPE insulated power cable and Fire Resistant Cable are suitable for fixed laying in power transmission
and distribution lines with A.C.50Hz and voltage rating of up to or including 6KV.

Performance Characteristics:
1. The long-term permissible operation temperature of conductor shall not be higher than 70 .
2. Conductor maximum short circuit (not more than 5 seconds) temperature shall not be higher than 160 .
3. The cable is not limited by drop in level when being laid, and the environment temperature shall not be 0 .
4. Perfect chemical stability, resistant against acids, alkalis, grease and organic solvents, and flame retardance.
5. Light weight, perfect bending properties, installed and maintained easily and conveniently.
Voltage rating:0.6/1KV 3.6/6KV.
Conductors: copper or aluminum.
Number of

cable cross: one core (Single core), two cores
(Double cores), three cores, four cores (Four Equal-section-area
cores or three equal-section-area and one smaller section area
neutral core), five cores (Five equal-section-area cores or three
equal-section-area cores and two small area neutral cores). We
provide armored type and non-armored type for the cables stated
above.
Outer sheath: PVC or PE.
Our company has been carrying out Chinese national standard GB12706 and GB12666.6 (equivalent
to IEC60502 and IEC60331) for PVC Insulated Power Cable and fire resistant cable needed by domestic
customer, and for foreigner customers we can manufacture in accordance with BS, DIN and other countries
standards. In addition, we can design and manufacture PVC insulated power cable with special characteristics
according to needs of customers.

Reference Standards:

IEC60502-1, IEC 60228, IEC60332 -1/2/3, BS6346, BS5467, BS6360, BS6724, VDE0276, AS/NZS 5000.1, etc.

Rated Voltage:

600/1000V (0.6/1kV)

Core Number:

Single Core, Two Core, Three Core, Four Core, Five Core (1C, 2C, 3C, 4C, 5C)

Available Dimensions:

1.5mm2, 2.5mm2, 4mm2, 6mm2, 10mm2, 16mm2, 25mm2, 35mm2, 50mm2, 70mm2, 95mm2, 120mm2, 150mm2, 185mm2, 240mm2, 300mm2, 400mm2, 500mm2, 630mm2.

Codes Available:

NYY, NAYY, N2XY, NA2XY, NYCY, NYCWY, NYBY, NAYBY, NYRY, NAYRY, N2XRY, N2XBY, NA2XBY, NA2XRY, N2XH, NA2XH,NHMH, NHXMH,

VV, VLV,YJV, YJLV, VV22, VLV22, YJV22, YJLV22, VV32, VLV32, YJV32, YJLV32, VV72, VLV72, YJV72,YJLV72

Application:

To be laid indoors, in tunnel, cable furrow or pipe, underground. Steel tape armored cable could bear certain mechanical force, but it can't bear great pulling force. Steel wire armored cable is applicable to the well, water inside and fall in the bad soil, it can bear great pulling strength and mechanical forces.
It is recommended that the installation instructions indicated by the Local Electric Code, or any equivalent, be followed, so that the safeguarding of persons and the integrity of the product will not be affected during installation.

Construction:

Conductor:

Stranded round compacted copper or aluminum conductor (Cu / Al ), copper wire annealed.

Insulation:

XLPE (Cross-Linked Polyethylene) or PVC (Polyvinyl Chloride)

Core Identification:

1 Core: Brown
2 Cores: Brown, Blue
3 Cores: Brown, Black, Grey
4 Cores: Blue, Brown, Black, Grey
5 Cores: Green/Yellow, Blue, Brown, Black, Grey
Alternative core identification: White Cores with Black numbers

Filler:

Polypropylene filament with lapped binding tape

Separator:

Binding tape

Bedding:

PVC (Polyvinyl Chloride) or LSZH.

Armouring:

Single Core: Aluminium Wire Armoured (AWA)
Multi-core: Steel Wire Armoured (SWA) or Steel Tape Armoured (STA)

Sheath:

PVC (Polyvinyl Chloride), flame retardant PVC, PE, LSOH, HFFR

Colour:

Black

Temperature Rating:

0°C to 90°C (XLPE), 0°C to 70°C (PVC)
During short circuit (lasting less than 5 seconds) the maximum temperature of the cable conductor shall not be above 250°C (160°C for PVC)
Environment temperature should be no lower than 0°C for laying the cable.

Minimum Bending Radius:

Single Core Cable: Non Armored Cable 20D, Armored Cable 15D
Cores Cable: Non Armored Cable 15D, Armored Cable 12D.
Remarks: D means practical external diameter of the cable

1KV 1X2

cooper

IMG_20160708_103155_HDR

IMG_20160708_103155_HDR

QQ20160805111535

foreign customers in our factory

Transtation Way

Certificates

Looking for ideal XLPE Insulated Low Voltage Cables Manufacturer & supplier ? We have a wide selection at great prices to help you get creative. All the For Buildings Power Transport 1x2.5mm2 Power Cable are quality guaranteed. We are China Origin Factory of For Power Transmission and Distribution Lines Power Cable. If you have any question, please feel free to contact us.

Product Categories : Low Voltage Power Cable

Email to this supplier
  • *Subject:
  • *Messages:
    Your message must be between 20-8000 characters
Communicate with Supplier?Supplier
Crazy Zhang Mr. Crazy Zhang
What can I do for you?
Chat Now Contact Supplier