http://www.bjhygkcable.com
Home > Products > Middle Voltage Power Cable > Mc Cable Thhn/Thwn-2 Interlocked Armor Metal Clad Cable

Mc Cable Thhn/Thwn-2 Interlocked Armor Metal Clad Cable

Basic Info

Model No.MC,BX

Product Description

Mc Cable Thhn/Thwn-2 Interlocked Armor Metal Clad Cable


Product Description

This kind of MC cable is 600 Voltage Copper Conductors, THHN/THWN-2 as Inners, Single Green Insulated/Bare Grounding Conductor, 
Aluminum Alloy Interlocked Armor, PVC Jacket, Low-Temp, Oil, Sunlight Resistant, Flame Retardant, Direct Burial Metal Clad Cable.


Applications

Type MC cable complies with the following:
• Permitted use for service, feeders and branch circuits in residential, commercial, industrial, and 
multi-  residential buildings;
• Acceptable for power, lighting, control, and signal circuits;
• Utilized for indoor or outdoor applications, and allowable for concealed or exposed systems;
• Permitted in wet locations per USA NEC 330.10(A)(11)(a);
• Permitted for direct burial in the earth or embedded in concrete per USA NEC 330.12(2)(a);
• Allowable in assembly occupancies (USA NEC 518.4);
• Permissible in theaters, audience areas of motion pictures, television studios, and similar locations (USA
  NEC 520.5);
• Suitable for installation under raised floors for IT equipment (USA NEC 645.5);
• Permitted as Aerial Cable on a messenger and allowable installations in approved raceways and cable trays
  (USA NEC 392);
• Suitable for installation under raised floors for IT equipment (USA NEC 645.5(E)) and permitted in Class I
  Div. 2, Class II Div. 2, and III Div. 1 Hazardous Locations and listed for use in UL 1, 2, and 3 Hour Through-  
  Penetration Firestop Systems;

APPLICATION
Type MC Cable - Isolated Ground is constructed with soft-drawn copper, Type THHN/THWN
conductors rated 90°C dry available in sizes 12 AWG and 10 AWG, and two insulated grounding conductors--one solid green and the second green with yellow stripes. The conductors are cabled together and a binder tape bearing the print legend is
wrapped around the assembly. Aluminum interlocking armor is applied over the assembly. 

Type AC Cable BX is constructed with soft-drawn copper, Type THHN insulated conductors which are
individually wrapped with a moisture-resistant, flame-retardant paper covering. Aluminum interlocking armor is applied over the assembly. A 16 AWG aluminum bond wire is placed inside the armor, runs longitudinally and is in intimate contact with the armor for its entire length.

Mc Cable 5
 

Power Tray Cable Applications
  • Type MC Cable is suitable for use as follows:
    • Branch, feeder and service power distribution in commercial, industrial, institutional, and multi-residential buildings.
    • Power, lighting, control, and signal circuits.
    • Fished or embedded in plaster.
    • Concealed or exposed installations.
    • Environmental air-handling spaces per NEC 300.22 (C).
    • Places of Assembly per NEC 518.4 and theaters per NEC 520.5.
    • Installation in cable tray and approved raceways.
    • Under raised floors for information technology equipment conductors and cables per NEC 645.5(D) & 645.5(D)(2).
    • Class I Div. 2, Class II Div 2, & Class III Div. 1 Hazardous Locations.
 
  • Type AC Cable is suitable for use as follows:
    • Branch, feeder and service power distribution in commercial, industrial, institutional, and multi-residential buildings.
    • Power, lighting, control, and signal circuits.
    • Dry locations only.
    • Fished or embedded in plaster.
    • Concealed or exposed installations.
    • Environmental air-handling spaces per NEC 300.22 (C).
    • Installation in cable tray and approved raceways.
    • Under raised floors for information technology equipment conductors and cables per NEC 645.5(D) & 645.5(D)(2).


FAQ:


(1).How long can I get the Quotation?

We usually quote in 6 hours after receiving your inquiry.

If you are very urgent to get the price,please call me or send me email directly so that we will regard your inquiry priority.

(2).How about the cable quality?

We have got the ISO, TUV, BSI, API certificate.

And after price confirmation, you can require for samples to check our quality. Sample is free, but the freight charge should be paid.

(3).How long can I get the sample?

After you pay the freight charge and send us confirmed files, the samples will be ready for delivery in 3-7 days. The samples will be sent to you via express and arrive in 3~5 days. You can use your own express  account or prepay us if you do not have an account.

(4).How about the delivery time?

In fact, it depends on the order quantity and the season you placeed the order.There are 10 production line in our factory, generally, 7-15 days from the data we received the advanced payment to the date the goods is finshed and ready for the witness by the delegate of the buyer.


Product Categories : Middle Voltage Power Cable

Email to this supplier
  • *Subject:
  • *Messages:
    Your message must be between 20-8000 characters
Communicate with Supplier?Supplier
Crazy Zhang Mr. Crazy Zhang
What can I do for you?
Contact Supplier