OVERHEAD CABLE ACSR Conductor 185/25 mm2

Payment Type:	L/C,T/T,D/P,Paypal,Money Gram,Western Union
Incoterm:	FOB,CFR,CIF,FCA,CPT,CIP
Min. Order:	10 Kilometer

 OVERHEAD CABLE ACSR Conductor 185/25 mm2

Basic Info

Model No.: ACSR

Brand: HUAYUAN YONGTONG

Application: Overhead

Voltage: High Voltage Cable

Current: AC Cable

Insulation Material: Bare

Material Shape: Round Wire

Wire Core Material: Steel

Certification: ISO

Brand: HUYUAN YONGTONG

Additional Info

Packaging: DRUM

Productivity: 1000KM PER MONTH

Transportation: Ocean,Land,Air

Place of Origin: CHINA

Supply Ability: 2000KM/MONTH

Certificate: CE,CCC,ISO

Port: Tianjin Port,Qingdao Port,Shanghai Port

Payment Type: L/C,T/T,D/P,Paypal,Money Gram,Western Union

Incoterm: FOB,CFR,CIF,FCA,CPT,CIP

Product Description

TECHNICAL SPECIFICATION

FOR

ALUMINUM CONDUCTOR STEEL REINFORCED［ACSR］

SIZE:185/25 mm²

1.0 SCOPE

This specification covers the design and construction of bare aluminum conductor steel reinforced(ACSR)conductors used for transmission of electrical energy in the overhead transmission lines.

2.0 REFERENCES

IEC 61089,IEC 60889,IEC 60888,EN 50182.

3.0 DESCRIPTION

Concentric lay stranded conductors composed of a central core of round zinc coated steel wire surrounded by one or more adjacent layers of round hard drawn aluminum wires being laid helically in opposite directions. The conductor shall be constructed generally in accordance with above mentioned standard.

4.0 CONDUCTOR CONSTRUCTION

4.1 Steel Core

The steel core is made of by of steel wire, which shall meet the following requirements:

Nominal wire diameter : 2.10 mm

Tolerance on diameter: ±0.03 mm

Nober of steel wire :7

Section of Steel wires:24.3 mm²

Min. weight of zinc coating: 215 g/m²

Min. Stress at 1% extension: 1170 N/mm²

Tensile strength: ≥1310 N/mm²(before twisting)

4.2Aluminum Strands

The adjacent layers［10］of round hard drawn aluminum wires shall be laid helically in opposite directions over the steel core. The aluminum wires shall meet the following requirements:

Nominal wire diameter: 3.15mm

Tolerance on diameter: ±0.03mm

Section of Aluminum conductorpart:190.9 mm²

NO. of aluminum wire : 24

Tensile strength: ≥165N/mm2

Recommended Lay Length Ratio:

1^st Layer: 12-14 right hand direction

There shall be no gap between wires of each layer and the conductor must not bulge out during bending, hauling, etc.

5.0 TECHNICAL REQUIREMENTS:

The completed ACSR conductor shall essentially meet the following requirements:

Rated diameter:18.9 mm

Nominal area:215.2 mm²