Huayuan Gaoke Cable Co.,Ltd.
Overhead Sheathed Aluminum Cable,Aerial Bundled Cable,XLPE Insulation Cable
Payment Type: | L/C,T/T,Paypal,Western Union |
---|---|
Incoterm: | FOB,CFR,CIF,FCA,CPT |
Min. Order: | 1000 Meter |
Model No.: ABC
Brand: HUAYUAN YONGTONG
Type: Insulated
Conductor Type: Stranded
Application: Heating
Conductor Material: Copper
Sheath Material: PVC
Insulation Material: PVC
Material Shape: Round Wire
Range of Application: Cold-Resistant
Certification: ISO9001
Brand: HUAYUAN YONGTONG
Packaging: Drum
Productivity: 1000km/M
Transportation: Ocean,Land,Air
Place of Origin: Beijing,China
Supply Ability: 1000km/M
Certificate: CE,CCC,ISO
HS Code: 8544601200
Port: Tianjin Port,Shanghai Port,Qingdao Port
Payment Type: L/C,T/T,Paypal,Western Union
Incoterm: FOB,CFR,CIF,FCA,CPT
Aerial Bundle Cable (ABC Cable) is a very innovative concept for overhead power distribution as compared to the conventional bare conductor overhead distribution system.
It provides higher level of safety and reliability, lower power losses and ultimate system economy by reducing installation, maintenance and operative cost.
Caledonian LV Aerial Bundle Cables are designed to supply 600/1000 volt aerial service for temporary service at construction sites, as a service drop (power pole to service entrance), as a secondary cable (pole to pole) or street lighting.
This over-head cable provides reinforced insulation acc. IEC 61140 and fulfill therefore Class II acc. IEC 61140. It is not flame retardant. But this could be if requested change to a flame retardant cable.
What is the overhead insulated cable??
Our overhead insulated cable have formed a system, such as single core, two-core, three-core and four-core. There are conductors of aluminum, copper or aluminum conductors steel-reinforced.
Application
To be used at voltage of 600V pahse-to -pahse or less and at conductor temperatures not to exceed 750C for polyethylene insulated conductor or 900C for crossliked polyethlene (XLPE) insulated conductors.
Cable's characteristics
1) Rated voltage U:10kV
2) Installing temperature should not be below -200C.
3) admissible bending radius to cable:
4) Admissible bending radius to cable should be not less than 20(d+D)±5%mm.
Where:D-real overall diameter of cable (mm). d-real diameter of conductor (mm)
Construction
Conductor | Aluminium conductor, round stranded compressed (RM). |
Insulation | XPLE compound, UV-resistant. |
Core Identification | 1, 2 resp. 3 raised longitudinal ribs on the surface of the cores. The surface of the neutral core should have at least 12 ribs for cross-sections up to 50 mm^2 and a minimum of 16 ribs for cores above 50 mm^2. In the case of five core bundles the surface of the protective core should be smooth. |
Nominal Area | Number /Dia. | Insulation Thickness | Dcresistance PHASE | NEUTRAL Rated Strength kn | Delivery Lerngth | |
mm2 | mm | mm | &Ω/km | AAC | AAAC | km |
1×16+16 | 7/1.70 | 1.3 | 1.7986 | 3.02 | 4.69 | 10 |
2×16+16 | 7/1.70 | 1.3 | 1.7986 | 3.02 | 4.69 | 7.5 |
3×16+16 | 7/1.70 | 1.3 | 1.7986 | 3.02 | 4.69 | 5 |
4×16 | 7/1.70 | 1.3 | 1.7986 | 3.02 | 4.69 | 5 |
1×25+25 | 7/2.10 | 1.3 | 1.1787 | 4.36 | 7.15 | 6.5 |
2×25+25 | 7/2.10 | 1.3 | 1.1787 | 4.36 | 7.15 | 5 |
3×25+25 | 7/2.10 | 1.3 | 1.1787 | 4.36 | 7.15 | 3.2 |
4×25 | 7/2.10 | 1.3 | 1.1787 | 4.36 | 7.15 | 3.2 |
1×35+35 | 7/2.50 | 1.3 | 0.8317 | 6.01 | 10.14 | 4.5 |
2×35+35 | 7/2.50 | 1.3 | 0.8317 | 6.01 | 10.14 | 3.5 |
3×35+35 | 7/2.50 | 1.3 | 0.8317 | 6.01 | 10.14 | 2.2 |
4×35 | 7/2.50 | 1.3 | 0.8317 | 6.01 | 10.14 | 2.2 |
1×50+50 | 7/3.0 | 1.5 | 0.5776 | 8.41 | 14.6 | 3 |
3×50+50 | 7/3.0 | 1.5 | 0.5776 | 8.41 | 14.6 | 1.3 |
1×70+70 | 19/2.10 | 1.5 | 0.4367 | 11.85 | 19.41 | 2.2 |
3×70+70 | 19/2.10 | 1.5 | 0.4367 | 11.85 | 19.41 | 0.8 |
3×95+95 | 19/2.50 | 1.6 | 0.3081 | 16.32 | 27.51 | 0.5 |
Rated Voltage | 0.6/1kV |
Test Voltage | 4 Veff kV |
Minimum Laying Temperature | -20°C |
Operating Temperature | -40°C~ +90°C |
Maximum Short-circuit Temperature | 250°C |
Maximum Conductor Temperature | 80°C |
Minimum Bending Radius | 18×OD |
Number of Cores x Nominal Cross Section | Overall Diameter | Weight | Maximum Conductor Resistance | Minimum Breaking Load | Current Rating |
No.×mm^2 | mm | Kg/Km | Ω/Km | KN | A |
1x16 RM | 8 | 74 | 1.91 | 2.5 | 72 |
1x25 RM | 9 | 106 | 1.2 | 4 | 107 |
1x35 RM | 10.5 | 138 | 0.868 | 5.5 | 132 |
1x50 RM | 11.8 | 182 | 0.641 | 8 | 165 |
1x70 RM | 13 | 252 | 0.443 | 10.7 | 205 |
1x95 RM | 15.4 | 333 | 0.32 | 13.7 | 240 |
1x120 RM | 17 | 408 | 0.253 | 18.6 | 290 |
1x150 RM | 19 | 502 | 0.206 | 23.2 | 334 |
1x185 RM | 21 | 611 | 0.164 | 28.7 | 389 |
1x240 RM | 24 | 801 | 0.125 | 37.2 | 467 |
2x16 RM | 15.6 | 147 | 1.91 | 2.5 | 72 |
2x25 RM | 18 | 208 | 1.2 | 4 | 107 |
2x35 RM | 20 | 277 | 0.868 | 5.5 | 132 |
2x50 RM | 23.5 | 361 | 0.641 | 8 | 165 |
2x70 RM | 25.4 | 505 | 0.443 | 10.7 | 205 |
2x95 RM | 30.3 | 666 | 0.32 | 13.7 | 240 |
2x150 RM | 38 | 1004 | 0.206 | 23.2 | 334 |
4x16 RM | 18.8 | 286 | 1.91 | 2.5 | 72 |
4x25 RM | 21.2 | 430 | 1.2 | 4 | 107 |
4x35 RM | 24.1 | 553 | 0.868 | 5.5 | 132 |
4x50 RM | 27.8 | 746 | 0.641 | 8 | 165 |
4x70 RM | 31.8 | 1009 | 0.443 | 10.7 | 205 |
4x95 RM | 37.8 | 1332 | 0.32 | 13.7 | 240 |
4x120 RM | 54.4 | 1632 | 0.253 | 18.6 | 290 |
Product Categories : Aerial Insulated Cable